From artists research and their work which i have looked at ive decided to combined Dalit tayars mediums but use JaumePlensa's techniques of having a human head made out of layers. So i am going to made a human head out of plaster of paris, but from layers built onn top of each other. Then i will photograph this as evidence. I will then take the top layer of his head away and use the half/ half nature reserach which i found to made my out model from my artist research. From there i will add sticks on top of the head and maybe from my old project of me myself and i use copper wire to put volume in between the remaining layers. This is then bringing my old mistakes and techniques contemporary.
I needed 4 layers but i only had two puts the same and two others which were simular but had a dint in the top which made my idea hard( the black pub shown above). But what i thought of is using vasaline on the inside of the tub so that i didnt have to cut away the tub and only be able to use it once. So i did a tester in the black one which i wasnt to bothered about, it worked. After it had cooled as plaster of paris is a chemical reaction were its heats up to solidify. The plaster simply came out of the tub with just a little muscle power.
So i filled the two tubs which i wanted to use and left to dry for around 30 minutes, in the mean time i updated my blog. I repeated this process again and i had 4 layers. I did some playing aroud on on to see what different tools created inthe plaster.
this is two layers on top of each other giving myself an idea of height and width and how i would start off the head. i began with a plaster cast grater.
No comments:
Post a Comment